CET PFP-99hp-DSL

Image

Pompa Pemadam Portable 99hp

ENGINE SPECIFICATIONS

  • Kubota Diesel developing 99hp at 2600 RPM, water cooled with Internal system, 4-cylinder, diesel engine
  • 12V Electric start
  • 6 gallons capacity fuel tank, sufficient for 2 hours continous operation approximately, made of plastic, with filling neck and lid

 

PUMP UNIT SPECIFICATIONS

  • C.E.T two stage centrifugal pump
  • Pump body made from resistant aluminium alloy
  • Bronze Impeller
  • Mechanical shaft seal
  • Stainless steel pump shaft
  • Electric priming system, guaranteed up to 15′ (4.5 metres) lift
  • Two 2 1/2″ (65mm) delivery outlets
  • One 4″ (100mm) suction Inlet
  • Dimensions : Length: 62″ (1575mm); Width: 37″ (940mm); Height: 59″ (1500mm)
  • Weight : 1500 lbs (680kg)

CONTROL PANEL

  • Engine start/stop button
  • Throttle control lever
  • Oil control gauge
  • Operating panel light
  • Pressure gauge
  • Vaccum pressure gauge

Performance 99hp

CET PFP-57hpVW-DSL

Image

Pompa Pemadam Portable 57hp

 

 

 

 

 

 

 

 

 

 

ENGINE SPECIFICATIONS

  • Volkswagen developing 57hp at 4000 RPM, water cooled with internal system, 4-cylinder, diesel engine
  • 12V eletric start
  • 6 gallons capacity fuel tank, sufficient for 2 hours continous operation approximately, made of plastic, with filling neck and lid

PUMP UNIT SPECIFICATIONS

  • Single stage centrifugal pump
  • Pump body made from resistant aluminium alloy
  • Bronze Impellers
  • Mechanical shaft seal
  • Stainless steel pump shaft
  • Electric priming system, guaranteed up to 20′ (6 metre) lift
  • Two 2 1/2″ (65mm) delivery outlets
  • One 4″ (100mm) suction Inlet
  • Dimensions : Length: 50″ (1270mm); Width: 27″ (685mm); Height: 31″ (787mm)
  • Weight : 1000 lbs (454 kg)

CONTROL PANEL

  • Engine start/stop button
  • Throttle control lever
  • Oil control gauge
  • Operating panel light
  • Pressure gauge
  • Vacuum pressure gauge

Image

CET PFP-30hpKHL-2D

Image

C.E.T PFP-30hpKHL-2D

Engine Specifications :

  • Kohler 30hp at 3600 RPM, air cooled engine
  • V-Twin cylinder gasoline engine
  • Electric start
  • 6 gallon (22L) detachable fuel tank

Pump Unit Specifications :

  • C.E.T single stage centrifugal pump
  • Pump body made from high resistance aluminium alloy
  • Bronze impeller
  • Mechanical shaft seal

CET Tyranno 20hp-MR

Image

Pompa C.E.T Tyranno 20hp-MR

Tekanan dan Volume Pompa

Kapasitas volume dan besarnya tekanan yang dimiliki oleh Pompa Kebakaran ini sangat cocok untuk aplikasi Drop In Unit. Mesin dan pompa ini terpasang pada rangka baha yang didesain dengan pegangan berbentuk lipatan.

 

 

 

Spesifikasi Mesin :

  • Kohler 20hp at 3600 rpm, mesin berpendingin udara
  • Mesin bensin silinder tunggal
  • Starter elektrik dengan starter rekoil sebagai back up
  • Tangki bensin terintegrasi 6 gallon (22 L) tangki bensin bisa dilepas

Baca lebih lanjut